Product Description:

The MAC090B-0-ND-2-C/110-A-0/S001 is an AC servo motor produced by Bosch Rexroth Indramat and cataloged within the MAC AC Servo Motors series. Built for analog drive systems, it delivers controlled rotary motion to indexing tables, pick-and-place axes, and other positioning mechanisms on automated lines. By converting current sourced from a drive amplifier into synchronized electromagnetic torque, the unit forms the electromechanical interface between command electronics and the mechanical load.

At installation, precise seating is achieved through a centering shoulder whose diameter is 110 mm, providing coaxial alignment between the motor shaft and attached transmission elements. Thermal energy leaves the frame through natural convection, so no auxiliary fan or liquid circuit is necessary as long as ambient airflow is unobstructed. Speed information is generated by an internal tacho in a tacho feedback arrangement; this analog voltage is proportional to shaft speed and lets legacy controllers close the velocity loop without digital encoders. The shaft is supplied with no blocking brake, so vertical loads must be secured externally when power is removed. Feedback accuracy is maintained by the factory-graded standard tacho quality, balancing performance for general-purpose motion sequences.

Power conductors exit through a keyed plug identified as a connector on side A, simplifying cable runs when the motor is mounted on right-hand machine walls. Within a control loop that transmits voltage and current commands, the unit is classified as a motor for analog drives, ensuring electrical compatibility with older Indramat TDM or KDS amplifiers still common in production cells. Membership in the MAC AC Servo Motors family keeps flange dimensions and winding data consistent across the 090 frame.