Product Description:

The MAC090B-0-JD-4-C/110-A-0/WI524LV/S001 belongs to the MAC AC Servo Motors series produced by Bosch Rexroth Indramat. It is an AC servo motor intended for closed-loop motion axes where precise speed and torque regulation are required in industrial automation cells and retrofit equipment that still employ analog drive electronics. By converting drive current into controlled mechanical rotation, the unit positions tooling, conveyors, or auxiliary mechanisms with the accuracy expected from this product line. It is well suited to indexing stations, transfer devices, and other machine functions that depend on repeatable rotary motion over long operating cycles.

The motor body is centered with a diameter of 110 mm, allowing direct alignment to gearboxes or machine frames without extra adapters. Heat generated in the stator is removed through natural convection, so installation must provide unobstructed airflow rather than forced cooling hardware. Power conductors enter through a connector on side A, which determines cable routing and helps establish the required clearance around the connection area. Mechanical holding during power-off is not supplied because there is no blocking brake, so static loads must be retained by the drive or an external clamp. Speed and position data can be processed from integrated tacho feedback with an incremental or absolute encoder, giving the analog controller a choice between velocity-based and position-based control.

This unit is a motor for analog drives, so its signal levels and connector pinout match legacy Indramat drive racks without adaptation. The tacho quality is standard, which suits general-purpose servo tasks that do not require a special feedback grade. Additional position information is available from an incremental encoder with standard mounting, enabling fine interpolation by the drive for tighter regulation bandwidth without requiring a nonstandard mounting format. This feedback arrangement supports stable speed monitoring during routine axis movement and provides position data for applications that need more detailed control.