Product Description:

The MAC090A-0-ZD-4-C-110-A-0-WI524LV-S001 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is intended to deliver closed-loop rotary motion to analog servo drives that position machine axes in automated manufacturing cells, pick-and-place heads, or forming equipment. By converting regulated current from the drive into controlled torque and speed, the motor supports dependable axis control in systems that require repeatable motion.

For mechanical alignment, it provides a centering seat of 110 mm, allowing direct mounting to gearboxes or end effectors without additional adapters. Heat is removed through natural convection, so no external blower or liquid circuit is required. The rated operating speed is 1500 rpm, which balances torque production with thermal load in medium-inertia systems. A built-in tacho generator outputs 3 V/1000 rpm, giving the analog controller a proportional velocity signal for real-time regulation. Power enters through a plug positioned on side A, and this arrangement is identified as connector on side A.

The electromagnetic design uses winding code ZD, which corresponds to the electrical values expected by compatible Indramat drives. The motor has no holding brake, so static load retention must be supplied by drive torque or an external brake module. Position data is delivered by an incremental encoder with standard mounting, and the encoder tracks shaft rotation while operating alongside the tacho feedback for closed-loop control. Because the product is classified as a motor for analog drives, its feedback signals, thermal behavior, and electrical characteristics match Indramat legacy analog controllers. This arrangement supports use in existing automation systems where analog control architecture is already in place.