Product Description:

The MAC090A-0-ZD-4-C/110-A-0/W1524LV/S001 is an AC servo motor in the MAC AC Servo Motors series from Bosch Rexroth Indramat. It interfaces with Indramat analog drive amplifiers to translate command currents into controlled shaft rotation for automated packaging lines, pick-and-place units, transfer systems, and other positioning axes that depend on steady response. By coupling a permanent-magnet rotor with electronic commutation, the motor supplies repeatable torque and speed for mid-power industrial motion tasks that require accurate acceleration and consistent velocity control.

The mechanical fit is governed by a centering diameter of 110 mm, allowing precise seating in standard machine flanges. Thermal energy leaves the housing through natural convection, so no fan or coolant circuit is required during normal operation. During rated operation, the shaft reaches 1500 rpm, enabling direct coupling to gear stages that expect this base speed. A built-in tachogenerator produces 3 V/1000 rpm, supplying the analog controller with a proportional velocity signal for closed-loop regulation. The ZD winding code indicates resistance and inductance values that match the current output range of compatible MAC drive modules.

All stator power is routed through a connector on side A, which simplifies cable routing when the motor is mounted in tight cabinets or near adjacent machine elements. The tachometer assembly is standard, giving sufficient speed resolution for most indexing and traversing duties. For higher accuracy, feedback can be provided by an incremental or absolute encoder housed in the same end bell, and this option can operate alongside the tacho loop when the control system requires additional position information. The motor is supplied without a blocking brake, so external means must secure the load when power is removed.