Product Description:

The MAC090A-0-ZD-2-C/130-A-0/S003 is an AC servo motor manufactured by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. It is intended for analog drive systems that translate voltage commands into precise shaft rotation for positioning tables, conveyors, or tooling spindles in automated machinery. The frame follows MAC mounting dimensions, which helps it fit machine layouts already arranged for this motor family. This motor format is commonly used on axes that need controlled acceleration, steady mid-range speed, and compact installation. Integrated feedback allows the paired amplifier to regulate motion accurately during operation.

Its nominal speed is 1500 rpm, meaning the shaft turns at a moderate rate suited to indexed motion and general servo tasks. Heat is removed by natural convection, so the housing relies on ambient airflow instead of external fans or coolant lines. A 130 mm centering diameter aligns the motor on the mounting surface for concentric coupling with driven components. The centering shoulder helps maintain alignment between the motor shaft and the driven load during installation. Winding code ZD identifies the electrical design used for this frame, and the internal tachogenerator provides 3 V/1000 rpm for linear speed feedback to the controller.

The motor comes with no blocking brake, so holding torque must be provided by the drive or by external machine hardware when the axis is stopped. Power conductors exit through a connector on side A, which keeps cable routing on the designated connection side of the housing. The connection layout keeps power leads grouped at one end of the housing, which can simplify routing in fixed machine designs. Configured as a motor for analog drives, it works with voltage-controlled amplifiers for direct current control in closed-loop motion systems. This arrangement suits installations that use established analog servo hardware and do not require digital network-based control inside the motor itself.