MAC07C10-0-GS-4-0/95-A-1/DI518LX Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC07C10-0-GS-4-0/95-A-1/DI518LX is part of the MAC AC Servo Motors series and is designed for analog drives. It features a nominal speed of 6000 rpm, a standstill torque of 6.6 Nm, and a standard blocking brake with a nominal voltage of 24 V DC. The motor has IP65 protection, uses natural convection for cooling, and includes an incremental encoder with shock-damped mounting.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC07C10-0-GS-4-0/95-A-1/DI518LX is an AC servo motor built by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Classified as a motor for analog drives, it works with current-controlled servo amplifiers to supply precise torque and velocity in pick-and-place axes, packaging equipment, and other industrial positioning tasks. The motor includes an integrated blocking brake to maintain shaft position when the drive is disabled, making it suitable for vertically loaded mechanisms. Its combination of servo feedback and brake functionality supports applications that require accurate motion control and controlled stopping.
Under rated conditions, the rotor reaches 6000 rpm. The motor can supply a standstill torque of 6.6 Nm with a corresponding standstill current of 22.0 A. A torque constant of 0.300 Nm/A links drive current to generated torque, which helps the amplifier respond predictably to command changes. Copper losses are limited by a winding resistance of 0.17 Ohm, and the 1.7 mH winding inductance helps smooth current ripple from the amplifier. Natural convection removes heat, a 95 mm pilot diameter aligns the housing concentrically to the machine frame, and the power connector is oriented on side A for direct cabinet routing. Position feedback is provided by an incremental encoder with shock-damped mounting that helps protect the sensing elements during machine vibration.
During acceleration phases, the drive can accept a peak pulse of 110 A, allowing motion axes to reach speed quickly. The integrated holding brake supplies 3.0 Nm of torque and is energized by a 24 V DC circuit to lock the shaft when stopped. An enclosure rating of IP65 protects internal components against dust and low-pressure water, enabling operation up to the maximum installation elevation of 1000 m. Thermal behavior is governed by a 45 min constant, giving a predictable window before steady-state temperature is reached. This operating profile suits analog servo systems that rely on stable electrical and thermal behavior during repeated motion cycles.
Frequently Asked Questions about MAC07C10-0-GS-4-0/95-A-1/DI518LX:
Q: Does the MAC07C10-0-GS-4-0/95-A-1/DI518LX servo motor include a blocking brake?
A: The MAC07C10-0-GS-4-0/95-A-1/DI518LX features a standard blocking brake.
Q: What holding brake torque does the MAC07C10-0-GS-4-0/95-A-1/DI518LX offer?
A: This model provides a holding brake torque of 3.0 Nm for secure load retention.
Q: What is the protection category of the MAC07C10-0-GS-4-0/95-A-1/DI518LX?
A: The protection rating for this motor is IP65, ensuring dust and low-pressure water resistance.
Q: What type of position feedback does the MAC07C10-0-GS-4-0/95-A-1/DI518LX provide?
A: The incremental encoder with shock-damped mounting is used for position feedback in this model.
Q: What is the nominal speed of the MAC07C10-0-GS-4-0/95-A-1/DI518LX motor?
A: This motor has a nominal speed of 6000 rpm for dynamic performance needs.
