MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911255934
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
33 Seconds
The Bosch Rexroth Indramat MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 is part of the MAC AC Servo Motors series and is designed for analog drives. This motor features a size 071 frame, 95 mm centering diameter, and an axial surface cooling type with an AC 115 V blower. It operates at a nominal speed of 6000 RPM and uses an incremental encoder for position feedback, along with a DIN 6885 keyway and side A connector power location.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Designed for analog drives, it converts command signals into repeatable torque and speed for indexing tables, pick-and-place axes, and packaging equipment. Its compact housing supports installation in multi-axis machinery where space is limited and airflow must be managed around neighboring components. The motor is intended for continuous industrial duty and supports controlled motion in printing and material handling systems where steady response is important. It works with an external drive amplifier to produce regulated motion at the machine axis during normal operation.
The motor housing uses an auxiliary blower powered by AC 115 V, and heat is removed by axial surface cooling along the stator casing. During installation, the front flange centers on a 95 mm pilot to keep the motor aligned with a gearbox or machine plate. Torque is transmitted through a DIN 6885 keyway, which fits common keyed couplings used on industrial drive trains. Within the MAC lineup, the unit is classified as size 071, giving it a frame format suited to medium-power axes. Because the motor is supplied without a blocking brake, the driven load must be held at standstill by drive torque or an external holding device.
Speed and position information are supplied by an incremental encoder with standard mounting, and the internal tachogenerator outputs 1.5 V/1000 rpm for analog drive feedback. The electrical design uses winding code GS, which allows a nominal speed of 6000 rpm when the motor is paired with the proper drive. Power conductors terminate on a connector on side A, which can help when machine walls or guards limit rear cable access. This arrangement keeps wiring concentrated on one side of the housing and supports orderly cable routing in tightly packed equipment. The combined feedback devices allow the connected drive to monitor shaft behavior during speed regulation and positioning tasks.
Frequently Asked Questions about MAC071C-2-GS-4-C-095-A-0-WI522LV-S001:
Q: What type of cooling is used in the MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 servo motor?
A: The MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 motor features axial surface cooling for efficient heat dissipation.
Q: What is the blower voltage required for the MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 motor?
A: The blower voltage for this model is rated at AC 115 V.
Q: What type of position feedback does the MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 motor use?
A: This motor uses an incremental encoder as its position feedback device, mounted in a standard configuration.
Q: What keyway specification is provided on the shaft of the MAC071C-2-GS-4-C-095-A-0-WI522LV-S001?
A: A DIN 6885 keyway is included on the shaft for secure coupling according to industry standards.
Q: What is the nominal speed rating of the MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 servo motor?
A: The MAC071C-2-GS-4-C-095-A-0-WI522LV-S001 operates at a nominal speed of 6000 revolutions per minute.
