MAC071C-1-NS-2-C/095-B-0/S001
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth MAC071C-1-NS-2-C/095-B-0/S001 AC servomotor deploys surface cooling. This motor is equipped with a heavy-duty blocking brake. It has a length code of C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC071C-1-NS-2-C/095-B-0/S001 AC servomotor from Bosch Rexroth supports surface cooling action. This servomotor has a nominal speed of 3000 min-1. The product is equipped with only a tacho feedback. This device has a keyway output shaft. The unit has an IP 65 protection category that allows it to be operated even under adverse conditions. It is not meant to be deployed for residential applications. This motor has a laminated core on its rotor with permanent magnets on it. The product is noted for its low inertia. This device is integrated with thermo switches that have a series connection. The unit is protected against overload damage by the thermo switches that monitor its temperature. Its connection cables are designed to meet the demands of the IP 65 protection category. This motor is protected against water sprayed on the housing from all directions. The product uses an axial blower to support its cooling. This device does not support the use of angle connectors for feedback. The servomotor has a dedicated connector for the blower connection. The unit should not be lifted by holding onto the output shaft or the blower. Its blower has a voltage rating of 230 VAC. This motor associated matching key must be ordered separately. The product can be used for applications with extreme loads because of the surface cooling support. This device has no blocking brake. The unit must never be installed at an elevation of more than 5000 m above sea level. It has an IP 44 protection rating. This motor has no second shaft end or mounted encoder.
Frequently Asked Questions about MAC071C-1-NS-2-C/095-B-0/S001:
Q: How does the cooling of the MAC motor take place?
A: The MAC motor is designed to be cooled through a surface cooling action.
Q: What is the shape of the shaft end of the output shaft of the MAC motor?
A: The output shaft of the MAC motor has a cylindrical shaft end as per DIN 748, Section 3 specifications.
Q: How is the MAC motor protected against overload damage?
A: The MAC motor is protected against overload damage by the integrated thermo switches.
Q: What is the overall length of the MAC motor?
A: The overall length of the MAC motor is 292 mm.
Q: What are the straight connectors that can be used for the tacho feedback of the MAC motor?
A: The MAC motor uses INS 302 or INS 102 straight connectors for tacho feedback.
