4.95 based on 202 reviews

🙶 Wake Ind. did a great job with very fast service getting us a motor driver to repair our critical robot sy... 🙷

MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 Bosch Rexroth Indramat

In-Stock, Ships 1-2 Days

Preparing your secure checkout page...

The Bosch Rexroth Indramat MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 is a motor for analogue drives from the MAC AC Servo Motors series. This motor has a centering diameter of 95 mm, motor size 071, and a nominal speed of 2000 RPM. It features natural convection cooling and uses an incremental encoder for position feedback with standard mounting.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. Classified as a motor for analog drives, this size 071 unit converts proportional current commands into rotary motion for axes that rely on analog amplifiers rather than digital fieldbus drives. It provides continuous speed and torque regulation for positioning tables, pick-and-place modules, and conveyor sections that require stable feedback in a compact motor package. Because the control concept is analog, the motor can work with established amplifier platforms that use current commands and external feedback channels instead of onboard digital motion processing.

A centering pilot of 95 mm helps the motor seat accurately in housings or gearboxes. Heat is removed by natural convection, so no auxiliary fan is required when surrounding airflow is sufficient for rated dissipation. The windings carry code JS and support continuous operation at 2000 rpm, which suits analog velocity loops that depend on predictable base speed. The motor is supplied without a blocking brake, so any load that must remain fixed during power loss needs an external holding method. A built-in tachogenerator produces 3 V/1000 rpm, and its signal can be used directly by analog controllers for speed feedback. Motor length code C provides the active iron stack used for this output range.

The output shaft uses a DIN 6885 keyway to transmit torque while maintaining radial alignment with the driven load. Power cabling is routed through a connector on side B, which can simplify wiring when access to the rear of the machine is limited. For position loops, the integrated incremental encoder with standard mounting adds position feedback that complements the tachogenerator. This arrangement allows simultaneous speed and position monitoring on analog servo axes. It also supports legacy or retrofit analog systems that separate velocity regulation from axis positioning while keeping the motor package compact.

Blocking Brake
Not Present
Centering Diameter
95 mm
Cooling Type
Natural convection
Feedback Configuration
W/ tachofeedback incremental or absolute encoder
Keyway
DIN 6885 Keyway
Motor Length
C
Motor Size
071
Nominal RPM
2000min-1
Power Connection Location
Connector to side B
Product Type
Motor for analogue drives
Tacho Quality
Standard
Tacho voltage
3V/1000min-1
Type of position feedback
Incremental encoder with standard mounting
Winding Code
JS

Frequently Asked Questions about MAC071C-0-JS-4-C/095-B-0/WI520LV/S001:

Q: Does the MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 motor have a blocking brake?

A: The MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 does not include a blocking brake.

Q: What cooling method is used for the MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 servo motor?

A: This model uses natural convection for cooling.

Q: What is the type of position feedback on the MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 motor?

A: It provides position feedback through an incremental encoder with standard mounting.

Q: What is the centering diameter of the MAC071C-0-JS-4-C/095-B-0/WI520LV/S001?

A: The centering diameter for this motor is 95 mm.

Q: What is the nominal RPM of the MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 model?

A: The nominal speed of this motor is 2000 rpm.


Internal Product Review

  • ‘‘The MAC071C-0-JS-4-C/095-B-0/WI520LV/S001 is a motor for analogue drives that offers a refined servo solution for precise machine control. Natural convection cooling and a 2000 min-1 nominal speed support efficient operation with stable thermal performance. The incremental encoder with standard mounting stands out as a strong feature for accurate feedback and dependable response.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo