Product Description:

The MAC071B-0-TS-4-C/095-B-1/WI524LV/S001 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Supplied as a motor for analog drives, it converts commanded current into regulated shaft torque and speed for precise motion control in automated assembly lines, printing stations, and similar industrial equipment. Its integrated feedback arrangement supports stable speed regulation and repeatable positioning during continuous industrial operation.

Its dynamic performance originates from a nominal speed of 3000 rpm, allowing direct coupling to gear stages without overspeeding. The flange seats against a centering diameter of 95 mm, which helps keep mounting alignment tight during high-cycle operation. A 3 Nm blocking brake engages automatically when power is removed, helping prevent load drift on vertical axes. Heat generated in continuous duty is dissipated through natural convection, so no external fan or liquid cooling loop is required. The motor shaft uses a DIN 6885 keyway, providing a standardized interface for pulleys or couplings that must transmit bidirectional torque without slip. Standard tacho quality and a tacho voltage of 3 V/1000 rpm provide velocity feedback to the drive.

The electrical design coded as TS matches the phase inductance and resistance values used by legacy MAC controllers. For position feedback, the unit integrates an incremental encoder mounted in the prescribed orientation, while an additional tachogenerator can be used when very linear speed feedback is required. Power conductors terminate through a connector on side B, placing the high-current wiring away from the machine front to simplify cable routing. The frame designation 071 is paired with motor length B, balancing moment of inertia and continuous output for mid-range traverse axes. This layout keeps the motor suitable for applications that need compact installation, controlled acceleration, and dependable analog-drive compatibility.