MAC071B-0-TS-3-C/095-B-1/S001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC071B-0-TS-3-C/095-B-1/S001 is part of the MAC AC Servo Motors series and is designed as a motor for analog drives. It features a motor size of 071, a centering diameter of 95 mm, and a nominal speed of 3000 RPM. This motor has a standard blocking brake with a torque of 3 Nm and uses natural convection for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC071B-0-TS-3-C/095-B-1/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Classified as a motor for analog drives, it converts command voltages from legacy amplifiers into controlled torque and speed for automated machinery. Integrated tachometer feedback provides the connected amplifier with real-time speed information for closed-loop regulation. A mechanical holding brake is built into the frame, allowing the unit to handle positioning or velocity duties on conveyor sections, tool changers, and packaging axes without external transducers or brake modules.
A centering flange of 95 mm keeps the stator accurately aligned with gearboxes or machine plates. Frame code 071 indicates the housing cross-section, while length code B provides an extended magnetic stack for increased continuous torque without changing the mounting pattern. The winding designation TS indicates resistance and inductance values suited to analog current loops. Under nominal excitation, the rotor reaches 3000 rpm, which supports medium-inertia loads and a broad range of gearbox ratios. These operating characteristics allow the paired drive to regulate acceleration, steady-state speed, and deceleration across repetitive machine cycles.
Heat is removed through natural convection, avoiding the need for forced-air ducts or an auxiliary blower near the motor. Adequate clearance around the housing allows rising air to carry heat away from the stator during continuous operation. Power conductors exit through a connector on side B, which supports cable routing along the machine bed and keeps wiring clear of the primary shaft. The standard blocking brake supplies 3 Nm of static holding torque to secure vertical shafts when motor power is removed. Tachogenerator feedback produces 3 V/1000 rpm, providing a proportional analog signal that the amplifier can use to monitor rotor speed. An additional shaft end allows an encoder or manual handwheel to be coupled without disturbing the primary mechanical output.
Frequently Asked Questions about MAC071B-0-TS-3-C/095-B-1/S001:
Q: Does the MAC071B-0-TS-3-C/095-B-1/S001 motor have a blocking brake?
A: This model comes with a standard blocking brake installed.
Q: What is the blocking brake torque of the MAC071B-0-TS-3-C/095-B-1/S001?
A: The blocking brake on this motor produces a torque of 3 Nm.
Q: What cooling method does the MAC071B-0-TS-3-C/095-B-1/S001 servo motor use?
A: The MAC071B-0-TS-3-C/095-B-1/S001 motor uses natural convection for cooling.
Q: What feedback configuration does the MAC071B-0-TS-3-C/095-B-1/S001 feature?
A: This servo motor supports tachofeedback and includes a second shaft end.
Q: Where is the power connection located on the MAC071B-0-TS-3-C/095-B-1/S001?
A: The power connection for this model is positioned on side B of the motor.
