MAC071A-0-OS-2-F/095-A-1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC071A-0-OS-2-F/095-A-1 is part of the MAC AC Servo Motors series and is designed for analog drives. This motor features natural convection cooling, a 95 mm centering diameter, and a standard blocking brake with a torque of 3 Nm. It offers tachofeedback with increased smooth run quality and has a nominal speed of 3000 RPM.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC071A-0-OS-2-F/095-A-1 is an AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Designed for analog drives, it supplies controlled torque and speed to automated machinery such as pick-and-place units, indexing tables, and material-handling axes. Integrated feedback allows the connected amplifier to regulate motion during changing loads and repeated start-stop cycles. A built-in blocking brake keeps the shaft fixed when power is removed, allowing the motor to hold loads securely during idle states or emergency stops.
The motor’s nominal speed reaches 3000 rpm, giving a balance between rapid cycle times and manageable drive currents in general automation service. This speed range suits axes that need responsive motion without requiring a large motor frame. With frame size 071, the motor uses a stator diameter and coil geometry suited to this housing size, which supports mounting compatibility within the series. A centering diameter of 95 mm aligns the housing precisely on machine adapter plates, helping maintain concentricity for couplings or pulleys. The blocking brake develops 3 Nm of holding torque for light to moderate inertial loads. Heat is removed by natural convection, so no external fan or liquid cooling circuit is required.
Electrical power reaches the stator through a connector on side A, which can simplify cable routing inside compact enclosures and help avoid unnecessary cable bends near the motor body. Winding code OS identifies the electrical characteristics matched to compatible analog servo amplifiers in the same product generation. For velocity feedback, a mechanically coupled tacho generator produces 3 V/1000 rpm, allowing the drive to monitor speed with a linear signal across the operating range. The motor is delivered with integrated tacho feedback, which supports smooth low-speed regulation and stable response during changes in load. This feedback arrangement is useful in applications where steady speed control is required during frequent acceleration and deceleration.
Frequently Asked Questions about MAC071A-0-OS-2-F/095-A-1:
Q: What type of blocking brake is included on the MAC071A-0-OS-2-F/095-A-1 motor?
A: This motor features a standard blocking brake with a torque rating of 3 Nm.
Q: What kind of feedback configuration does the MAC071A-0-OS-2-F/095-A-1 offer?
A: The feedback system uses tachofeedback with increased smooth run quality.
Q: How is the MAC071A-0-OS-2-F/095-A-1 servo motor cooled?
A: Cooling is provided by natural convection, requiring no additional cooling equipment.
Q: Where is the power connection located on the MAC071A-0-OS-2-F/095-A-1?
A: The power connector is positioned on side A of the motor housing.
Q: What is the nominal speed of the MAC071A-0-OS-2-F/095-A-1 motor?
A: This motor is designed for a nominal speed of 3000 min-1.
