Product Description:

The MAC071A-0-ES-3-C/095-A-07S001 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. It is a motor for analog drives that converts drive amplifier commands into controlled shaft torque in automated machinery. In production lines, positioning tables, and packaging cells, this model supplies continuous rotary motion that can be regulated through velocity and current loops in the associated drive electronics. Because the motor works with an external servo amplifier, torque and speed are regulated by the paired drive rather than by onboard electronics.

The motor body seats into mounting fixtures through a centering diameter of 95 mm, which provides a precise pilot surface for concentric alignment. Heat generated in the stator windings is carried away by natural convection, so no external blower or liquid circuit is required. Rated operation reaches 4000 rpm, which supports high rotational output during continuous duty. Power conductors are routed through a connector on side A, keeping the cable exit on the same face as the machine harness. The winding code ES identifies the electrical characteristics expected by the analog controller. Motor length A places the unit among the shorter versions of this frame size, which helps limit installation depth in compact machine layouts.

The design omits a blocking brake, so load holding must be provided by external mechanics when power is removed. Motion feedback is supplied through the second shaft end with integrated tacho feedback, delivering 1.5 V/1000 rpm for proportional speed signaling to the drive. Frame code 071 indicates the stator diameter class used for this motor size. The feedback arrangement supports continuous analog velocity control, and the standard tacho section allows the drive to monitor speed without requiring a separate digital encoder system.