MAC071A-0-0S-3-C/095-B-0/S001

Product Description:

The MAC071A-0-0S-3-C/095-B-0/S001 model has a winding resistance of 3.5 ohms and a torque constant of 0.580 Nm/A. During natural convection, the motor generates a constant torque of 2.2 Nm while consuming the constant current of 3.8 A.

The MAC071A AC servo motor has a winding inductance of 20 mH and weighs 6.5 kg. The model's housing is coated with black paint, with a maximum layer thickness of 40 micrometers. For optimal performance, the motor must be paired with a suitable drive controller. The power connection for the AC servo motor is on the B side of the motor housing, as labeled in the user manual. The MAC series servo motor features tacho feedback and a second shaft end, and it can be installed up to 1,000 meters above sea level. Installation must be performed by a trained technician to ensure maximum performance and prevent damage.

The MAC071A-0-0S-3-C/095-B-0/S001 model has an IP65 protection grade and an F insulation level, making it suitable for challenging conditions. The first number in the protection grade indicates dust protection, while the second number indicates liquid protection. The motor has a centering diameter of 95 mm and an operating temperature range of 0 to +45 degrees Celsius. The model has a thermal time constant of 45 minutes and can operate at a speed of 3,000 rotations per minute. The model must be used with the accessories mentioned by Bosch Rexroth. The model comes without a holding brake. Opt for other models if a holding brake is required. Wake Industrial provides this Indramat MAC071 motor with a replacement warranty, which can be claimed in case of a fault or malfunction.