MAC063D-0-JS-4-C/095-A-1/WI553LV/S007
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911254977
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAC Permanent Magnet Motor manufactured by Bosch Rexroth Indramat. This motor has a power connecter on Side A. This motor also includes a Incremental Encoder with Standard Mounting encoder and a Standard blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC063D-0-JS-4-C/095-A-1/WI553LV/S007 AC servomotor produced by Bosch Rexroth is associated with the standard mounting of an incremental encoder. This motor incorporates its encoder connection in its electrical connection. The product comes with a brushless design. This device uses the holding brake to achieve a safe standstill of the axis even after the power has been turned off. The unit uses an output shaft equipped with a keyway as per DIN 6885 specifications. Its angle-style feedback connector is directed to side B by default. This motor has reduced output when it operates at a temperature ranging from 45 °C to 55 °C.
The product has a D length code. This device deploys square-wave pulses for the operation of its incremental encoder. The unit needs the reference point of its encoder to be set to a defined angular position. It has a continuous current rating of 5.1A in standstill mode. This motor operation plus maintenance can be undertaken only by trained personnel. The product is never to be cleaned using harsh cleaning agents. This device has its highest speed according to the DC bus voltage generated by the supply source present at the drive. The unit-related operating curves depict the allowed continuous torque with the S1 operating mode. This servomotor delivery takes place worldwide.
The motor should have no impact on the shaft during the commissioning and mounting stages. It is never supposed to be dropped or tipped during the transportation plus storage phases. This product is fitted with its type plate over its housing. The device-associated cables and the encoder cables must be routed parallel to each other at a distance of at least 100 mm from each other. This unit should be connected with the manufacturer-supplied cables as far as possible. It encompasses bearings with lubrication for a lifetime. The servomotor houses one-year backup support.
