Product Description:

The MAC063D-0-JS-2-C/095-B-0/S001 servo motor is produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. As a motor for analog drives, it converts drive current into controlled rotational motion and supplies velocity feedback to legacy drive controllers that rely on analog tacho signals. The unit is used in industrial automation where compact rotary axes must deliver repeatable speed and position control. Its integrated feedback arrangement supports systems that do not need a separate digital encoder interface. This makes the motor suitable for machinery built around established analog servo hardware.

Mechanical alignment is handled by a centering diameter of 95 mm, allowing the flange to seat accurately against gearboxes or mounting plates. Accurate centering helps maintain shaft alignment and can reduce stress on couplings during operation. The electrical design uses winding code JS, which matches the motor to the intended drive channel. Under rated operating conditions, the rotor reaches 3500 rpm, supporting fast operation in compact axis applications. Heat is removed by natural convection, so the housing needs unobstructed airflow during installation. The built-in tacho generator outputs 1.5 V/1000 rpm, giving the drive a proportional speed signal for closed-loop regulation.

The motor has no blocking brake, so any static load must be secured by drive torque or an external holding mechanism when power is removed. Power conductors exit through a connector on side B, which routes cables away from the driven shaft and can simplify rear cable access. This cable direction can be useful when the rear of the machine offers the cleanest routing path. The motor uses size 063 and length code D, which keep the housing compact for closely spaced axis layouts. It uses standard-quality tacho feedback, which is suited to analog controllers that do not require high-resolution position data.