Product Description:

The MAC063D-0-JS-1-C/095-B-1/I01000/S006 servo motor is produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Designed for analog drive systems, it converts commanded current into controlled torque and speed for positioning tables, pick-and-place axes, and similar automation tasks in industrial machinery. The permanent-magnet rotor interacts with three-phase stator windings to deliver precise motion, while a sealed connector supplies power and feedback through a single cable. This arrangement supports compact motion control in applications where installation space is limited.

The motor reaches a nominal speed of 3500 rpm, allowing rapid cycle times when the mechanical load is matched to its torque curve. Shaft alignment to gearbox flanges is aided by a centering diameter of 95 mm, which helps limit radial runout and vibration during operation. A blocking brake rated at 3 Nm holds the shaft when power is removed and prevents drift on vertical axes. Heat produced in the stator is dissipated by natural convection, so no external blower or liquid circuit is required. The JS winding code indicates the resistance, inductance, and current ratings used with compatible Indramat analog drive modules.

Velocity feedback for the drive is supplied by a tachogenerator that outputs 1.5 V/1000 rpm, giving proportional speed information for closed-loop regulation. The motor belongs to frame size 063, a compact format suitable for small transfer stations and light servo presses. Power conductors exit through a connector on side B, which can simplify cable routing when the housing is mounted against machinery on side A. Position reference signals are generated by an internal system that provides incremental encoder feedback, enabling finer motion tracking than the tacho alone during acceleration and deceleration phases.