Product Description:

The MAC063D-0-FS-4-C/095-B-1/WI634LX is an AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Intended for analog drive controllers, the unit supplies commanded torque and speed to machine axes used in assembly, material handling, and processing equipment. By converting electrical setpoints into rotary motion, it serves as the main actuator in closed-loop automation systems. This motor format is suitable for applications that need quick response, repeatable motion, and compact installation within general industrial machinery.

Its electromagnetic design supports continuous operation at a nominal speed of 6000 rpm, allowing fast motion profiles without requiring external gearing in many axis layouts. A factory-installed blocking brake provides 3 Nm of holding torque, which helps prevent load movement when drive power is removed or the amplifier is disabled. Thermal energy is dissipated through natural convection, so the motor does not depend on a separate cooling fan for routine operation. Alignment with gearboxes or mounting plates is supported by a 95 mm centering diameter that helps position the housing accurately during installation. The FS winding code identifies the electrical configuration used with the associated analog amplifier and supports predictable torque response across the rated duty range.

Velocity feedback is generated by an internal tacho that outputs 1.5 V/1000 rpm, giving the analog controller a direct speed signal during operation. Position feedback is provided by an incremental encoder in the standard configuration, allowing the control system to monitor shaft movement for coordinated axis control. All power conductors exit through a connector on side B, which helps keep cable routing organized around the motor body and connected machine hardware. The motor is categorized as size 063 with length code D, a combination that suits compact axes where low rotor inertia and quick acceleration are important. This feedback arrangement supports stable speed regulation and consistent motion behavior in automated equipment.