Product Description:

The MAC063D-0-FS-4-C/095-B-1/WI517LV/S001 is an AC servo motor produced by Bosch Rexroth Indramat in the MAC AC Servo Motors series. Built as a motor for analog drives, it delivers closed-loop speed and position control to medium-duty axes found in packaging, printing, and material-handling machines. A combined tachometer and encoder arrangement feeds real-time motion data to the drive amplifier, allowing precise regulation of torque and velocity without auxiliary sensors. This arrangement supports repeatable starts, stops, and speed changes when machine loads vary during operation.

The integrated blocking brake supplies 3 Nm of holding torque, keeping vertical or suspended loads stationary when power is removed. Under continuous operation, the rotor reaches a nominal speed of 6000 rpm. The winding code FS identifies the conductor thickness and thermal class used for this motor. Heat is carried away by natural convection, eliminating blowers and simplifying cabinet layouts. A centering shoulder with a diameter of 95 mm aligns the flange to gearboxes or brackets, and the D motor length helps reduce installation depth. The feedback configuration combines tachometer feedback with incremental encoder signals so the analog controller can regulate both velocity and position.

Electrical power is routed through a connector on side B, keeping high-current conductors clear of the encoder end. Shaft torque is transmitted by a DIN 6885 keyway, ensuring positive engagement with pulleys or rigid couplings. The tachogenerator produces 1.5 V/1000 rpm and uses the standard quality level for this series. For position measurement, the motor carries an incremental encoder with standard mounting hardware, which helps keep the feedback assembly straightforward. Frame size 063 indicates the stator cross-section and inertia range suited to mid-duty automation tasks. The keyed shaft arrangement is also useful in applications with frequent reversing and indexing motion.