Product Description:

The MAC063D-0-FS-4-C/095-B-1/WI511LV/S007 is an AC servo motor engineered by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is intended for analog velocity or position drives that require repeatable high-speed motion on compact axes. The motor uses the 063 frame class with a D-length stator, which keeps the package narrow enough for packaging lines, pick-and-place gantries, and small transfer stations. Its compact form and low inertia support quick acceleration where installation space is limited.

The motor includes a blocking brake rated at 3 Nm, allowing the shaft to hold position against gravity or light process forces during shutdown. A centering pilot diameter of 95 mm supports accurate alignment to reducers and mounting faces. Housing temperature is managed through natural convection, so operation does not require forced cooling but does require open airflow around the housing. The rotor can reach 6000 rpm, which supports rapid indexing on light automation axes. Mechanical power is transmitted through a shaft with a DIN 6885 keyway, and the integrated shaft seal helps limit the entry of contaminants. The FS winding code matches the electrical characteristics used by compatible analog drives, and the motor also includes a standard tacho generator.

Speed regulation is supported by a generator output of 1.5 V/1000 rpm, which provides a proportional signal to the analog drive. Precise position control is handled by an incremental encoder, allowing the controller to track shaft movement during commanded motion. The motor is built in size 063, a format that balances low rotor inertia with moderate torque for light automation duties. Motor leads exit through a connector on side B, which helps keep the cable path away from the driven machine face. This cable orientation can simplify routing in compact assemblies and reduce interference with nearby couplings or guarding.