Product Description:

The MAC063D-0-FS-4-C/095-B-1/W1524LV is an AC servo motor in the MAC AC Servo Motors series and is manufactured by Bosch Rexroth Indramat. Designed as a motor for analog drives, it converts commanded current into precise rotary motion for positioning, speed, and torque regulation in industrial automation systems. It is suited for packaging machines and small gantries where repeatable axis movement is required. Its compact servo design supports accurate motion control on equipment that must respond smoothly to changing load conditions.

Its mechanical frame follows motor size 063 and the D length stator, giving a compact assembly for narrow machine spaces. A centering diameter of 95 mm aligns the flange to the driven load while maintaining concentricity. The built-in blocking brake is rated at 3 Nm, supplying static holding torque during power loss, and it is included as a standard feature. Natural convection cooling removes heat from the housing without forced airflow, which simplifies installation. The FS winding code identifies electrical values used by compatible analog amplifiers. Under rated excitation, the shaft reaches 6000 rpm, supporting high-speed cycles in pick-and-place or spindle duties.

For feedback, the motor is equipped with an incremental or absolute encoder with tacho feedback, allowing the analog drive to derive both speed and position signals. The internal tacho generator produces 1.5 V/1000 rpm, and this proportional voltage supports stable analog speed regulation. Mains conductors terminate through a connector on side B, allowing the cable to exit opposite the driven machine face and reducing bending stress. This arrangement keeps the feedback and power connections accessible at the motor housing while avoiding the need for separate external feedback devices.