Product Description:

The MAC063D-0-FS-4-C/095-B-0/WI560LV/S023 is an AC servo motor in the MAC AC Servo Motors series and is intended for use with analog drives in industrial automation. It operates as a rotary actuator that converts commanded current into controlled torque and speed for positioning tasks, feed axes, and other motion systems that require steady regulation. The size 063 housing with D length gives the unit a compact footprint while still supporting the feedback and thermal behavior expected from this motor family. The motor is supplied without a blocking brake, so any holding function at standstill must be provided by the drive or by external mechanical means.

A centering pilot of 95 mm helps align the motor housing accurately to the machine interface during installation. The motor supports a continuous standstill current of 5.1 A, which indicates the current it can carry at zero speed under steady thermal conditions. Cooling is provided by natural convection, so the housing releases heat without an auxiliary fan or liquid circuit. The enclosure is rated IP65, which helps protect internal components from dust and water jets. Standard tacho and incremental encoder feedback provide the velocity and position signals needed by the analog drive for stable control.

The motor has a nominal base speed of 3500 rpm, while speeds up to 6000 rpm are available for short operating periods when thermal conditions allow. Its tacho output is 1.5 V per 1000 rpm, giving the controller a proportional speed signal across the usable range. Power is connected through a connector on side B, which can simplify cable routing when the machine layout favors that direction. The winding code FS identifies the electrical winding configuration used for this motor version. These electrical and mechanical features support consistent response during changing loads and normal axis acceleration.