Product Description:

The MAC063D-0-FS-4-C/095-B-0/WI518LV/S007 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. As a motor for analog drives, it converts command voltages from legacy controllers into precise mechanical rotation for positioning tables, pick-and-place axes, and similar motion stages in industrial automation. Its format suits machinery that needs fast response and accurate speed regulation without adding a separate feedback package.

The motor is designed for a nominal speed of 6000 rpm, allowing fast traverse rates in compact machinery. A centering diameter of 95 mm aligns the stator housing to gearboxes or mounting flanges with minimal concentricity error. Heat is removed by natural convection, so no external blower is required. The output shaft is machined with a DIN 6885 keyway so torque can be transmitted through standard keyed couplings. Winding code FS identifies the phase resistance and inductance set used by Indramat to match this frame to analog drive modules. Motor size 063 and length code D give the unit a longer active stack for this frame, while the absence of a blocking brake keeps inertia low for rapid acceleration. The motor also uses integrated feedback to support stable speed and position control during repetitive motion.

A shaft seal on the output side protects the bearing set from coolant splash and ambient dust during high-speed service. Power is fed through a connector on side B, which keeps the cable bundle clear of the driven load when the motor is installed with side A toward the machine frame. The tacho generator produces 1.5 V/1000 rpm, giving the analog drive a velocity reference for closed-loop regulation. Position data are delivered by an incremental encoder mounted with the standard flange interface, completing the feedback loop without additional adapters. This arrangement supports accurate speed monitoring and consistent axis response in compact machine layouts.