Product Description:

The MAC063D-0-FS-4-C/095-B-0/WI517LV/S001 is an AC servo motor produced by Bosch Rexroth Indramat and supplied within the MAC AC Servo Motors series. Designed as a motor for analog drives, it converts drive commands into precise shaft rotation for positioning or speed-regulated automation axes. The unit’s compact 063 frame simplifies integration into machinery that relies on rapid changes in velocity while still demanding repeatable feedback for closed-loop control. Its feedback arrangement allows the connected amplifier to monitor motion continuously, which supports accurate response during changing load conditions.

The winding code FS indicates the electrical resistance and inductance set used with compatible MAC servo amplifiers. A centering diameter of 95 mm provides the pilot fit that aligns the housing to a gearbox or mounting flange. Heat is removed by natural convection, so airflow around the frame must remain unobstructed when the motor delivers continuous torque. The motor reaches a rated speed of 6000 rpm, allowing fast positioning cycles in pick-and-place or spindle duties. For wiring, the power connection uses a connector on side B, which helps separate the power conductors from the feedback connection. This layout helps keep cable routing orderly in compact machine assemblies.

Mechanical holding force is not supplied because the motor has no blocking brake, so vertical loads require an external clamp or powered hold. Rotor torque is transmitted through a DIN 6885 keyway, providing positive engagement with couplings. Speed feedback is proportional to rotation through a tacho voltage of 1.5 V/1000 rpm, while an incremental encoder with standard mounting supplies digital position data. The tacho and incremental feedback channels support stable low-speed regulation in analog drive systems.