Product Description:

The MAC063D-0-FS-4-C/095-B-0/WI517LV servo motor is produced by Bosch Rexroth Indramat as a member of the MAC AC Servo Motors series. Intended for analog drive systems, it translates current-controlled outputs from a drive controller into precise rotary motion that positions tooling, indexes conveyor sections, or maintains set speeds in automated machinery. The model’s mechanical envelope fits compact assemblies while still delivering the dynamic performance expected from closed-loop industrial axes in packaging, transfer, and indexing equipment.

The stator and flange align on a centering diameter of 95 mm, matching standard machine frames built around size 063 mounting patterns. A winding code of FS indicates the conductor gauge and slot pitch that support a nominal shaft speed of 6000 rpm without exceeding thermal limits. Heat generated at this speed leaves the housing by natural convection, so no external blower or liquid circuit is required and cabinet layouts stay simple. The incremental encoder in the feedback configuration supplies tachofeedback for velocity loops and supports accurate speed regulation during operation. Standard tacho quality keeps ripple within limits suitable for most packaging or material-handling duties.

The motor is supplied with no blocking brake, so holding torque during power-off must be provided by the machine mechanics or the drive itself. Power conductors exit through a connector on side B, allowing cable trays to follow the rear of the axis rather than the load side. The tachometer output is fixed at 1.5 V/1000 rpm, giving the controller a linear speed reference over the full operating band. The rotor stack corresponds to motor length code D, which adds extra active iron for higher continuous torque while keeping the overall footprint compact.