Product Description:

The MAC063D-0-FS-4-C/095-A-0/WI524LV/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is intended for analog drive systems that perform speed and position regulation in the controller. This motor converts electrical input into rotary motion for automated handling, packaging, and tooling axes in industrial automation, where repeatable movement, smooth acceleration, and stable feedback are important for day-to-day machine operation.

The rotor and stator geometry correspond to a frame size of 063, and the housing uses a centering diameter of 95 mm for direct seating in matching machine plates. The FS winding code identifies the copper fill and magnetic circuit used with compatible drives. Continuous operation relies on natural convection cooling, so heat leaves the housing through ambient airflow without external blowers. Under rated excitation, the shaft reaches a nominal speed of 6000 rpm, providing a high speed-to-torque ratio for light-inertia loads. No blocking brake is installed, so position retention during power-off must be handled by the machine or drive. That arrangement is common where the load can be secured by the mechanism itself or by controlled motor torque.

The motor has a length code of D, and the shaft ends in a DIN 6885 keyway for positive torque transfer to pulleys or couplings. Electrical power enters through a connector on side A, which can simplify harness routing along one face of the cabinet. Motion feedback is handled by a tachogenerator that supplies 1.5 V/1000 rpm and by an incremental encoder mounted in the standard position, so the controller can track both velocity and position during operation. The tachogenerator is a standard-quality unit, and optional absolute sensing can be fitted under the same feedback cover when the application requires stored position information after a power cycle.