Product Description:

The MAC063D-0-FS-3-C/095-A-0/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat as part of the MAC AC Servo Motors series. Intended for analog drive systems, this unit converts regulated three-phase power into precise shaft rotation, making it suitable for positioning tasks in automated assembly, light machining, and packaging machinery where tight speed control and repeatable torque are required. Its compact design supports use on machine axes where installation space is limited. The motor is also suitable for repetitive motion cycles that require stable speed response during changing load conditions.

The electromagnetic package uses winding code FS, frame size 063, and length index D. These values indicate the stator geometry and magnetic stack depth associated with this motor. Under rated excitation, the rotor reaches a nominal speed of 6000 rpm, enabling rapid cycle times without mechanical gear multiplication. A centering diameter of 95 mm locates the housing concentrically on gearboxes or precision flanges to minimize runout during high-speed operation. Thermal energy is removed through natural convection, so the motor must be mounted in a position that allows free airflow and does not rely on an auxiliary blower. The design is supplied without a blocking brake, which leaves the shaft free when power is removed and reduces axial length.

Motion feedback is delivered by a tachogenerator mounted on the second shaft end; it produces 1.5 V/1000 rpm, giving the analog drive a proportional velocity signal for closed-loop regulation. Output fidelity is graded as standard, which meets the accuracy demanded by typical pick-and-place or conveyor axes. Power conductors exit through a connector on side A, simplifying right-hand cabinet layouts and keeping the encoder end clear for service access. Because there is no internal brake, machines that need static holding must add external clamping or rely on drive torque to maintain position.