Product Description:

The MAC063D-0-FS-2-C/095-A-0 is a servo motor built by Bosch Rexroth Indramat and belongs to the MAC AC Servo Motors series. Classified as a motor for analog drives, it converts command signals from legacy analog amplifiers into controlled mechanical rotation for positioning, handling, and packaging tasks in automated machines. By integrating the winding, rotor, and feedback elements in one housing, the unit supports closed-loop speed and position control with compatible Indramat drive modules from the same product generation.

The mechanical interface uses a 95 mm pilot diameter that helps center the motor in geared or belt-driven mounting fixtures with minimal runout. A nominal speed of 6000 rpm allows high surface velocity without additional gearbox multiplication, while the tacho generator supplies 1.5 V/1000 rpm as an analog speed signal to the drive controller. Heat from the stator is removed through natural convection, so no external blower or liquid cooling circuit is required. Power conductors exit through a connector on side A, which helps keep cable routing orderly when several axes are installed in the same orientation.

Speed regulation is maintained through tacho feedback, which is used as an alternative to digital encoders in this design. The dimensional coding uses motor size 063 and motor length D, a combination that balances continuous torque with a compact housing. Electromagnetic characteristics correspond to the FS winding code, matching the phase resistance and inductance to the current limits of MAC analog drive amplifiers. The motor has no blocking brake, so applications that need static holding torque must use external locking devices. The internal tacho quality is standard, supporting consistent feedback accuracy across the operating range.