MAC063D-0-FS-1-C/095-B-1/101000/S00 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC063D-0-FS-1-C/095-B-1/101000/S00 is part of the MAC AC Servo Motors series and features a natural convection cooling type. This motor for analog drives has a nominal speed of 6000 RPM, a centering diameter of 95 mm, and utilizes incremental encoder feedback. It is equipped with a standard blocking brake delivering 3 Nm of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC063D-0-FS-1-C/095-B-1/101000/S00 is an AC servo motor developed by Bosch Rexroth Indramat for use in analog drive systems in the MAC AC Servo Motors series. Designed as a motor for analog drives, it translates voltage commands into precise shaft movement to actuate conveyors, indexing tables, or small pick-and-place stations on factory floors. Its electromechanical construction supports tight position control while remaining compatible with mature drive controllers that rely on tacho feedback rather than fully digital buses. This allows the motor to fit applications where existing analog control hardware is still used for motion tasks.
The motor uses a 95 mm centering diameter, allowing the housing to seat concentrically in standard mounting flanges and maintain alignment during high-speed operation. Heat generated by copper losses is removed through natural convection, so the motor can be installed without external fans when ambient airflow is adequate. Shaft position is relayed to the drive through incremental encoder feedback, giving differential channels for direction sensing and fine velocity regulation. The rotor uses winding code FS, which indicates the resistance and inductance values used by compatible drive modules. Under nominal excitation, the shaft reaches 6000 rpm, which suits light inertial loads that must accelerate quickly. For vertical axes, a blocking brake provides 3 Nm of holding torque, keeping the load suspended when power is removed.
The motor uses a D length stator in the 063 frame, adding active iron for higher continuous output. Power cabling enters through a connector on side B, so wiring can exit toward the machine wall and stay clear of feedback leads on the opposite face. Speed feedback to legacy regulators is supplemented by a tacho generator that produces 1.5 V per 1000 rpm, which provides an analog speed signal for drive control. This cable arrangement can help keep routing cleaner in compact machine layouts where separation between power and feedback conductors is useful.
Frequently Asked Questions about MAC063D-0-FS-1-C/095-B-1/101000/S00:
Q: What type of blocking brake and torque does the MAC063D-0-FS-1-C/095-B-1/101000/S00 servo motor feature?
A: This model is equipped with a standard 3 Nm blocking brake for secure holding during halted operation.
Q: What feedback system is implemented in the MAC063D-0-FS-1-C/095-B-1/101000/S00 motor?
A: The MAC063D-0-FS-1-C/095-B-1/101000/S00 uses incremental encoder feedback for position and speed detection.
Q: What is the nominal RPM of the MAC063D-0-FS-1-C/095-B-1/101000/S00?
A: This servo motor supports a nominal speed of 6000 revolutions per minute.
Q: How is the MAC063D-0-FS-1-C/095-B-1/101000/S00 servo motor cooled?
A: The cooling system relies on natural convection and does not require an external fan or forced air setup.
Q: Where is the power connection located on the MAC063D-0-FS-1-C/095-B-1/101000/S00 servo motor?
A: The power connects via a side B connector, facilitating easier installation depending on application layout.
