Product Description:

The MAC063D-0-FS-1-C/095-A-1/-I00500 is a compact AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Intended for analog drive systems, this motor supplies controllable torque and speed to machinery axes that demand high repeatability. Within industrial automation cells, it acts as the electromechanical actuator, following voltage or current commands from the drive to position tooling, index conveyors, or spin lightweight spindles with minimal overshoot.

The unit is equipped with a blocking brake rated at 3 Nm, enabling the shaft to hold its position whenever power is removed from the drive. Under rated excitation, the rotor can reach a nominal speed of 6000 min⁻¹, a figure that aligns with high-throughput pick-and-place or packaging stations. Precise mechanical seating is supported by a 95 mm centering diameter that aligns the flange to machine frames without external shims. Heat generated in the stator is dissipated by natural convection; no external blower or coolant manifold is required, which simplifies cabinet design. Rotor position information is returned through incremental encoder feedback, so the analog controller receives phase-consistent signals for closed-loop velocity and position regulation. The power connector is located on side A, keeping cable runs parallel to the motor housing.

Winding code FS identifies the stator turns and wire gauge so that current demand matches the drive’s analog amplifier limits. The integrated tacho generator produces 1.5 V/1000 min⁻¹, providing a linear speed reference that coexists with the incremental channel for redundancy. Frame designation 063 and length index D set the active magnetic stack depth and overall body size. A standard mounting arrangement is used for the position transducer, and the brake, encoder, and tacho circuits share a common interface through a single multi-pin feedback connector.