Product Description:

Bosch Rexroth Indramat manufactures the MAC063C-0-MS-4-C/095-B-0/WI511LV/S001 as part of the MAC AC Servo Motors series. The unit is an AC servo motor for analog drive systems and is applied where precise velocity and position loops are required in industrial automation. By delivering controlled torque in a compact frame, the motor acts as the electromechanical interface between the drive electronics and the machine axis, supporting pick-and-place actuators, indexing tables, and light-duty packaging axes.

Mechanical mounting is aided by the 95 mm centering diameter, allowing the stator housing to seat concentrically against gearboxes or plates without additional alignment sleeves. Heat produced in continuous motion dissipates through natural convection, so no auxiliary fan or liquid circuit is required. The winding stack, identified by the MS code, matches the electrical impedance expected by MAC drive controllers and supports a nominal speed of 3500 rpm for fast cycle times. The motor has no blocking brake, so holding torque at standstill must come from the drive or an external clamp. Motor length C and the incremental encoder mounted in the standard position supply feedback for both speed and commutation.

The integrated tacho generator delivers 1.5 V/1000 rpm, providing an analog speed signal for velocity loops in analog control schemes. Shaft torque is transferred through a DIN 6885 keyed interface, and this standardized keyway eases coupling selection while limiting slip under load. Power enters through a connector on side B, keeping cable exits away from the driven shaft. The physical envelope labeled size 063 balances mass with dynamic response for compact multi-axis machinery. This layout also helps keep wiring clear of nearby couplings and other rotating parts during installation on tightly packed machine axes and fixtures.