Product Description:

The MAC063C-0-MS-3-C/095-B-1/S006 AC servo motor is produced by Bosch Rexroth Indramat and forms part of the MAC AC Servo Motors series. Designed as a motor for analog drives, it supplies precise speed and position control to automated packaging, printing, and material-handling stations. Its permanent-magnet rotor converts sinusoidal drive current into torque, while the compact housing supports direct integration into machinery that relies on analog velocity and position loops. This arrangement suits equipment that uses an external drive amplifier for closed-loop motion control and expects stable motor response across repeated duty cycles.

The motor uses frame size 063 with stack length C, which gives it the magnetic length and rotor inertia associated with this housing format. A rated speed of 3500 rpm allows rapid cycling in indexing and transfer applications without requiring an oversized motor. Heat from the stator is dissipated by natural convection, so the housing should be installed where air can circulate freely around the outer surface. A centering pilot of 95 mm helps align the motor with machine plates or mating components. Power conductors connect on side B, which can simplify routing when cable space is limited.

An integral brake provides 3 Nm of holding torque to help keep the shaft from moving when operating power is removed. Speed feedback is provided through tacho feedback and a second shaft end, producing an analog velocity signal suited to controllers that use 1.5 V/1000 rpm scaling for speed evaluation. The motor uses winding code MS, which indicates the electrical characteristics intended for medium supply voltages and fast current rise. This combination supports older control architectures that depend on separate feedback devices rather than fully digital motor communication.