Product Description:

The MAC063C-0-MS-2-C/095-B-1/S007 is an AC servo motor built by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Designed as a motor for analog drives, it converts drive commands into precise rotary motion for positioning and speed-control tasks in automated machinery. The model pairs with Indramat analog servo controllers to deliver closed-loop performance suited to pick-and-place stations, packaging equipment, and light machining axes. Its compact frame and integrated tacho feedback support quick response during repeated operating cycles. This arrangement lets the drive amplifier correct speed changes quickly when the load varies during indexing and continuous motion.

At the mechanical interface, the centering shoulder measures 95 mm, which supports accurate flange alignment and helps limit radial runout during installation. The motor uses natural convection for cooling, so heat is removed without an external blower and cabinet airflow requirements stay simple. Under rated supply, the rotor reaches 3500 rpm, which gives the axis a broad operating range for medium-inertia loads. The internal holding brake provides 3 Nm of static torque when power is removed, which is useful on axes that must remain stationary during power-off conditions. Winding code MS identifies the electrical design used with the matching analog drive.

Frame size 063 and motor length C keep the housing compact enough for tight machine layouts without making the motor difficult to mount. The compact body is useful where nearby tooling, guards, or adjacent axes leave limited installation space around the motor. Electrical feedback comes from the built-in tacho generator, which outputs 1.5 V/1000 rpm to the controller for speed monitoring and loop correction. The motor comes with tacho feedback, so no separate external speed sensor is required for normal operation. For streamlined wiring, incoming power is routed through a connector on side B, which helps keep cable routing clear of nearby machine elements.