Product Description:

The MAC063C-0-MS-2-C/095-B-1/S006 is a servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is intended for analog drives, so the controller sends a continuous analog command that the motor follows to regulate speed and torque during operation. This unit is used in industrial automation lines where compact rotary axes must track reference signals accurately for packaging arms, feed rollers, and light pick-and-place heads.

A blocking brake integrated at the non-drive end delivers 3 Nm of holding torque, so vertical or suspended loads can remain fixed when power is removed. The housing seats against a centering pilot of 95 mm, which helps align the stator with gearboxes or direct-drive plates. Heat generated by copper losses is removed through natural convection, so no external blower or liquid cooling loop is required. Under rated excitation, the shaft can reach 3500 rpm, giving moderate surface speed for small timing pulleys or belt wheels. Frame designation 063 identifies the outer diameter class within the MAC family and helps match the motor to compatible mounting layouts.

The power conductors are routed through a connector on side B, which keeps the opposite face clear for mechanical coupling in tight enclosures. For velocity feedback, the motor uses tacho feedback, which generates an analog signal proportional to speed. The device supplies 1.5 V/1000 rpm, allowing the drive to maintain a precise speed loop without a digital encoder. Mechanical depth follows length code C, which uses a longer active stack for higher continuous torque within this frame size. Winding code MS identifies the coil impedance so the associated analog drive can apply the proper voltage, while the standard tacho quality supports repeatable speed calibration during normal operation.