Product Description:

The MAC063C-0-MS-2-C/095-A-0/S009 is an AC servo motor produced by Bosch Rexroth Indramat as part of the MAC AC Servo Motors series. Designed for analog drive systems, it converts controlled electrical input into the torque and speed required for position or velocity loops in industrial automation. The C-length frame, 63 mm class construction, and integrated tacho feedback make this unit suitable for moderate-power axes in packaging, material handling, and assembly lines where accurate incremental motion is needed.

Mechanical mounting starts with a centering pilot of 95 mm, which aligns the housing to the machine base and helps keep radial runout within tolerance. Heat produced in the stator is carried away solely by natural convection; no fan or liquid circuit is provided, so airflow around the case must remain unobstructed. Speed feedback is provided through integrated tacho feedback, and this analog velocity signal simplifies speed loops in drive controllers that do not employ digital encoders. The motor belongs to the 063 frame size and delivers its rated output at a nominal speed of 3500 rpm, allowing relatively high spindle or feed rates while maintaining compact dimensions. A blocking brake is not included, so external holding devices are required whenever static load retention is critical.

Electrical termination is simplified by a power connector oriented on side A, which helps keep cables clear of adjacent axes. The built-in tacho generator produces 1.5 V/1000 rpm, a standardized voltage that enables direct interface with analog velocity amplifiers without scaling circuits, and the tacho quality is standard for general-purpose accuracy. The overall length uses code C, which matches the motor's frame length designation in this series. Winding code MS corresponds to the resistance and inductance values expected by legacy drive modules, supporting stable current control under natural cooling conditions.