Product Description:

The MAC063C-0-HS-2-C/095-B-1 is an AC servo motor produced by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. Designed for analog drive systems, it converts command voltages into controlled torque and speed for automated feeders, small spindles, and pick-and-place axes in industrial machinery. Its compact form factor and high nominal speed make it suitable for installations where space is limited but rapid acceleration is required. That combination also suits fast cycling applications that need stable motion during frequent starts, stops, and direction changes.

The motor reaches a nominal speed of 6000 rpm. Its stator uses the HS winding code, which indicates the resistance and inductance values expected by the analog amplifier. Heat generated in the winding is dissipated through natural convection, so no fan or liquid circuit is included. The standard blocking brake supplies 3 Nm of holding torque, helping vertical or indexed loads remain fixed when power is removed. Speed information comes from a tacho generator with a linear output of 1.5 V/1000 rpm, allowing the control loop to measure actual speed directly and correct for load disturbances without digital conversion.

A centering diameter of 95 mm aligns the flange with standardized mounting faces, while the housing uses motor size 063. The axial build uses motor length C, which balances torque capability with machine depth. This flange fit helps maintain alignment between the motor and the driven mechanism, which supports smoother coupling behavior during operation. Power conductors are routed through a connector on side B, keeping cables away from the driven shaft and simplifying access in compact layouts. The tacho has standard accuracy, and the convection-cooled enclosure avoids moving cooling parts that could add wear during long operating cycles.