Product Description:

The MAC063B-0-GS-4-C/095-B-0/WI511LV is an AC servo motor produced by Bosch Rexroth Indramat and supplied within the MAC AC Servo Motors series. The unit belongs to the manufacturer’s analog-drive portfolio, meaning it is designed to interface with proportional command voltages rather than fieldbus-based motion modules. Within automated machinery, the motor converts drive current into controlled rotary motion that can be regulated by closed-loop speed or position control, providing precise axis operation for packaging, tooling, or material-handling systems.

Mechanically, the stator housing carries a centering pilot of 95 mm, allowing repeatable alignment into flanged gearboxes or bases. The winding code GS identifies the copper fill and impedance selected for moderate current and normal acceleration tasks, while the rotor can spin continuously at 3500 min⁻¹ under rated load. Heat produced during service is removed by natural convection, so no external blower or liquid jacket is required. The design is without a blocking brake, so any static holding torque must be provided by the drive or an external clamp. Motor size 063 and the B length code give the frame a compact footprint compatible with smaller automation cells.

Electrical terminations follow a connector on side B, keeping the power leads clear of the encoder cable path. Position control is handled by an incremental encoder mounted in the standard interface, and the rear bay can also accommodate tachometer feedback or absolute sensing. Tachometer output is calibrated for 1.5 V/1000 min⁻¹, matching standard analog velocity loops, and the tachometer quality is standard for general-purpose regulation. The rotor and stator assembly use motor length B, providing an adequate magnetic path without increasing overall diameter.