Product Description:

The MAC063B-0-GS-4-C/095-B-0/W1520LV/S001 belongs to the MAC AC Servo Motors series from Bosch Rexroth Indramat. It is a motor for analog drives that translates voltage commands into controlled rotary motion for industrial positioning and speed loops. Integrated tacho feedback, paired with the selected winding, allows the drive to monitor actual speed and adjust current in real time. This supports stable operation in pick-and-place systems, packaging equipment, and small-format tooling stations where repeatable motion is required across frequent start and stop cycles.

The motor reaches a nominal speed of 3500 rpm, which suits applications that need fast axis movement without auxiliary cooling. Its stator uses the GS winding code, which matches the electrical behavior expected by compatible analog amplifiers. Assembly to a machine frame is guided by a centering diameter of 95 mm, which helps keep the motor flange aligned with the driven mechanics. Heat is removed by natural convection, so no external blower or liquid circuit is required. The integrated tacho generator delivers 1.5 V/1000 rpm, giving the controller a proportional voltage signal for closed-loop regulation. Torque is transferred through a shaft with a DIN 6885 keyway, allowing standard keyed couplings to be installed directly.

The motor is designed without a blocking brake, so holding torque must come from the drive or the load side if power is lost. Its dimensions correspond to Motor size 063 and Motor length B, which gives the unit a compact housing for mid-range axes. Power and feedback conductors exit through a connector on side B, helping keep the cable bundle clear of the mounting surface. This routing can be useful where surrounding components limit access near the flange or where cables must be directed along the rear of the machine frame.