Product Description:

The MAC063A-0-RS-4-C-095-B-1-WI524LV is a compact AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Classified as a motor for analog drives, it supplies closed-loop torque and speed control to machinery that relies on analog velocity or current command signals. With an integrated blocking brake and standard tacho feedback, the unit is intended for positioning tables, light pick-and-place axes, and other motion loops that demand rapid acceleration and moderate holding force in industrial automation.

The motor should be installed and driven within its mechanical and thermal limits. A nominal speed of 6000 rpm allows high surface velocities while keeping the rotor within its intended operating range. The built-in brake supplies 3 Nm of holding torque, enough to secure low-mass loads when power is removed. Heat is dissipated by natural convection, so airflow around the housing must remain unobstructed during continuous operation. Precise shaft alignment is aided by a centering pilot of 95 mm, matching common gearbox flanges in the 60 mm frame class. Winding code RS indicates the electrical characteristics that the analog drive must match for stable current regulation.

Cabling is simplified because the power connector is oriented toward side B, which helps keep motor leads clear of moving parts on typical mounting layouts. Speed feedback for the analog controller comes from the tachogenerator, which outputs 1.5 V/1000 rpm and provides a standard feedback signal for velocity control. Frame designation 063 sets the overall stator diameter and pairs with motor length code A to support a low-inertia profile. Position verification is handled by an incremental encoder fitted with the standard mounting pattern, allowing the motor to work with compatible feedback interfaces in the series.