Product Description:

The MAC063A-0-RS-3-C/095-B-1/S001 belongs to the MAC AC Servo Motors series produced by Bosch Rexroth Indramat. It is an AC servo motor intended for analog drive systems where precise velocity and position control are required in assembly stations, small handling axes, or packaging machinery. The unit integrates into these automation tasks by converting drive current into controlled rotary motion while its internal tacho generator supplies speed feedback to the associated controller.

This model operates at a nominal speed of 6000 min⁻¹, allowing rapid cycle execution in light-duty servo loops. A blocking brake rated at 3 Nm provides mechanical holding torque during power-off states so external clamps are unnecessary. Accurate centering against the machine frame is achieved through a 95 mm centering diameter, which aligns the flange with mounting pilots. Thermal energy from the stator is released by natural convection; no external blower or liquid circuit is required, simplifying installation. Power conductors enter through a connector on side B, so cabinet layout can be planned around a fixed cable route and strain-relief hardware.

The integrated tacho generates 1.5 V per 1000 min⁻¹, providing an analog signal that the drive uses to maintain commanded speed within a narrow error band. Winding code RS indicates the resistance and inductance set that matches this motor to MAC drives of the same family, while size code 063 indicates the stator diameter and shaft height for compact machinery. The feedback package is supplied with tacho feedback and a second shaft end, allowing a downstream load encoder or mechanical sensor to share the opposite side of the shaft. Motor length code A keeps the overall body short, and the tacho quality is specified as standard for applications that do not need enhanced linearity.