Product Description:

The MAC063A-0-RS-3-C/095-A-0/S001 belongs to the MAC AC Servo Motors series manufactured by Bosch Rexroth Indramat. It is an AC servo motor engineered for analog drive systems in which the velocity and position loops are closed in the drive controller. By delivering fast, repeatable rotary motion in a compact frame, the unit supports pick-and-place modules, small packaging stations, and other equipment that needs precise low-inertia actuation within legacy automation architectures. Its compact format makes it suitable for machine sections where installation space is limited but responsive motion is still required.

For mechanical fit, the motor uses a centering diameter of 95 mm and carries the frame designation size 063, allowing direct coupling to compact gearboxes or mounting flanges. Its A-length stack balances torque with rotor inertia, while thermal dissipation relies on natural convection, eliminating auxiliary fans. The winding supports a nominal speed of 6000 rpm, giving ample surface velocity for short-cycle positioning tasks. Power conductors connect through a connector on side A, so the cable harness exits in a direction that can simplify routing in tight enclosures. This arrangement helps keep the motor easy to integrate where adjacent components leave little room for cable bends.

The assembly operates without a blocking brake, so static holding torque must be provided externally when line power is removed. Speed information is supplied by tacho feedback and a second shaft end, providing a speed-proportional signal for the connected controller. The tacho generates 1.5 V/1000 rpm, which helps the controller process stable speed feedback during operation. Electromagnetic characteristics are matched to compatible drive amplifiers through winding code RS, supporting high rotational speed together with responsive deceleration. The standard accuracy grade is suitable for many analog servo applications that depend on consistent closed-loop speed regulation.