Product Description:

The MAC063A-0-RS-2-C/095-B-1/S006 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is configured for analog drive systems, where the controller issues continuous voltage commands and the motor converts them into precise rotary motion for automated machinery such as pick-and-place units, indexing tables, and material-handling axes. By combining a compact frame with a high rated speed, the unit supports accurate yet rapid positioning tasks in industrial production lines. Its response characteristics make it suitable for axes that must start, stop, and reverse direction repeatedly during normal production cycles.

The servo uses frame code 063, and length code A indicates the shortest rotor stack in the MAC family, which helps reduce mass for quick acceleration. A centering diameter of 95 mm provides the pilot fit on the mounting flange and helps maintain coaxial alignment with gearboxes or load shafts. The winding variant coded RS matches drive electronics that use the corresponding electrical constants and thermal profile. Continuous operation at a nominal speed of 6000 rpm enables rapid cycle execution without overspeeding the magnetic circuit. Heat generated at this speed is dissipated by natural convection, so the motor does not require an external fan and can be used where simple cooling is preferred.

The holding function is provided by a built-in brake capable of 3 Nm of static torque, which helps prevent motion when the drive is disabled. Power leads are routed through the connector on side B, simplifying wiring when several axes share a panel or when cable routing space is limited. Speed feedback relies on tacho feedback; the integral tachogenerator supplies 1.5 V/1000 rpm, a level compatible with standard analog velocity loops. With standard tacho quality and the listed mechanical codes, the motor fits applications that continue to use legacy analog controllers.