Product Description:

The MAC063A-0-RS-2-C/095-A-0/S001 belongs to the MAC AC Servo Motors series manufactured by Bosch Rexroth Indramat. It is an AC servo unit intended for analog drive systems that require precise velocity regulation and position control on compact mechanical axes. The model is suited to applications where compact servo axes need stable speed response and repeatable positioning. Within automated assembly stations or light material-handling modules, this motor converts drive commands into rotational motion while providing real-time speed feedback to the controller.

The rotor seats against a centering feature that measures 95 mm in diameter, allowing repeatable alignment against gearboxes or mounting flanges. A winding code of RS indicates the stator’s electrical characteristics and matches the motor to compatible drives that can supply the required current response. Nominal speed capability reaches 6000 rpm, so rapid traverse moves can be executed without oversizing the mechanical structure. Shaft speed is reported by an internal tacho generator that produces 1.5 V/1000 rpm, giving the analog drive a proportional voltage reference for closed-loop control. Heat produced during continuous operation is dissipated by natural convection, eliminating the need for external blowers or liquid circuits and keeping the enclosure footprint minimal.

This motor is supplied without a blocking brake, so external clamping devices must hold vertical loads during power-off conditions. The frame corresponds to size 063 and length code A, which helps keep inertia low for short indexing cycles. Power conductors exit through a connector on side A, simplifying cable routing when that face remains accessible after installation. Position and velocity feedback are provided through integrated tacho feedback, which gives the drive a stable signal across the operating range. This arrangement suits motion systems that use proportional voltage references instead of digital encoder communication.