MAC063A-0-RS-1-C/095-B-1/-I00500 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC063A-0-RS-1-C/095-B-1/-I00500 is a servo motor from the MAC AC Servo Motors series, designed for analogue drive applications. It features a 6000 RPM nominal speed, 95 mm centering diameter, and uses natural convection cooling. The motor includes a standard blocking brake with 3 Nm torque and incremental encoder feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC063A-0-RS-1-C/095-B-1/-I00500 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Designed for analog drives, it translates current commands from a drive amplifier into precise mechanical motion required on lightweight positioning axes and compact spindle stations. The motor’s frame and mounting interface follow standardized industrial patterns, allowing installation in multi-axis assemblies with minimal mechanical adaptation. Its compact format is suited to automation equipment that needs repeatable motion without adding a large motor footprint.
The unit’s nominal speed reaches 6000 rpm, giving ample headroom for rapid indexing cycles and short positioning times. A standard blocking brake rated at 3 Nm holds the shaft when power is removed, allowing vertical loads to remain fixed without external clamps. Shaft alignment to adjoining mechanics is guided by a 95 mm centering diameter that maintains concentricity during high-speed operation. Heat produced in the windings leaves the housing by natural convection, eliminating the need for fans or liquid circuits in enclosed cabinets. Position data is returned to the drive through incremental encoder feedback, enabling closed-loop control of velocity and dynamic torque.
The built-in tacho generator supplies 1.5 V/1000 rpm, giving the analog controller a proportional speed signal for regulation at low and mid-range velocities. Power enters the stator through a connector on side B, which places the cable run opposite the driven load and helps simplify strain relief. Frame size 063 gives the motor a compact cross-section suited to machinery with limited centerline spacing. Winding code RS identifies the electrical resistance and inductance pair used with compatible MAC servo amplifiers.
Frequently Asked Questions about MAC063A-0-RS-1-C/095-B-1/-I00500:
Q: Does the MAC063A-0-RS-1-C/095-B-1/-I00500 come with a blocking brake?
A: This model includes a standard blocking brake, offering mechanical holding for precise stopping and control.
Q: What is the blocking brake torque of the MAC063A-0-RS-1-C/095-B-1/-I00500?
A: The blocking brake torque on this motor is rated at 3 Nm, providing reliable stopping force when engaged.
Q: What type of feedback configuration does the MAC063A-0-RS-1-C/095-B-1/-I00500 motor provide?
A: The MAC063A-0-RS-1-C/095-B-1/-I00500 features incremental encoder feedback for position and speed monitoring.
Q: How is the MAC063A-0-RS-1-C/095-B-1/-I00500 cooled during operation?
A: This MAC AC Servo Motor operates with natural convection cooling, so no external fans or forced cooling elements are required.
Q: What is the centering diameter of the MAC063A-0-RS-1-C/095-B-1/-I00500?
A: The centering diameter of this motor model is 95 mm, supporting stable mounting and alignment.
Q: What is the nominal RPM of the MAC063A-0-RS-1-C/095-B-1/-I00500 motor?
A: This model achieves a nominal speed of 6000 min-1, enabling high-speed operation in servo applications.
