Product Description:

The MAC063A-0-ES-4-C/095-B-1/WI524LV is a brushless AC servo motor manufactured by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. As a motor for analog drives, it receives sinusoidal current from classic servo amplifiers and converts it into precise mechanical rotation for automated equipment. The compact frame is intended for installations where low mass, quick response, and integrated holding capability are important, such as electronic assembly, labeling, or small conveyor stations used in general factory automation. Its overall format suits machines that need accurate motion control without requiring a large motor body.

An internal blocking brake supplies 3 Nm of static torque so vertical or oscillating loads remain fixed when the drive is disabled. Shaft alignment to gearboxes or couplings is simplified by a 95 mm centering diameter that locates the motor housing accurately without additional sleeves. Heat generated by the stator is removed by natural convection, eliminating the need for external blowers and helping keep surrounding machine layouts simple. Under nominal excitation, the rotor reaches 3500 rpm, giving moderate speed capability for light inertia loads while keeping operation stable. Power conductors exit through a connector on side B, which permits cable routing along the machine frame without crossing the feedback leads.

Tachogenerator output is 1.5 V/1000 rpm, supplying an analog velocity signal that the drive can use for stable speed regulation. The associated tacho quality is Standard, which supports consistent response in typical servo applications. Frame code 063 identifies the stator cross-section used for this motor size, while winding code ES indicates the copper arrangement and number of turns intended for the matching low-voltage amplifier range. The motor uses length category A to keep overall depth short, and the incremental encoder with standard mounting provides position feedback for indexing and positioning cycles.