MAC063A-0-ES-4-C/095-B-1/WI523LV Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAC063A-0-ES-4-C/095-B-1/WI523LV motor is manufactured by Bosch Rexroth Indramat as part of the MAC AC Servo Motors series. This motor has a nominal speed of 3500 RPM, natural convection cooling, and a centering diameter of 95 mm. It features a standard blocking brake with a torque of 3 Nm and uses an incremental encoder with standard mounting for position feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC063A-0-ES-4-C/095-B-1/WI523LV is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Built for analog drive amplifiers, the unit converts electrical command signals into controlled rotational motion for positioning axes, pick-and-place gantries, and tooling spindles in automated machinery. Its compact housing is suited to light-to-medium-duty applications that require quick acceleration, accurate positioning, and fine velocity control. Integrated position and speed feedback allows the connected drive amplifier to correct motion as operating loads change.
The rotor reaches a nominal speed of 3500 rpm, supporting high-speed motion in compact automated equipment. A centering pilot of 95 mm aligns the mounting flange accurately with compatible gearboxes or machine bases without additional shims. The motor uses winding code ES, which indicates the coil resistance and inductance used by a matching analog amplifier for current regulation. Stator heat is removed through natural convection, eliminating the need for an external fan or liquid-cooling circuit. An integrated blocking brake provides 3 Nm of static holding torque to keep vertical or suspended loads stationary when motor power is removed.
Power conductors exit through a connector on side B, keeping the cable route clear of the feedback housing and nearby machine components. Rotor position is reported by an incremental encoder mounted through the standard feedback interface for this motor series. A tachogenerator supplies a velocity signal of 1.5 V/1000 rpm for closed-loop speed regulation by the analog drive. The 063 frame size provides a compact stator housing for installations with limited space. The motor has an A length code, indicating a short magnetic stack that helps reduce rotor inertia and supports responsive acceleration during repetitive positioning cycles.
Frequently Asked Questions about MAC063A-0-ES-4-C/095-B-1/WI523LV:
Q: What type of blocking brake does the MAC063A-0-ES-4-C/095-B-1/WI523LV motor include?
A: This model is equipped with a standard blocking brake for holding the motor shaft in position when powered off.
Q: What is the blocking brake torque specification of the MAC063A-0-ES-4-C/095-B-1/WI523LV?
A: The blocking brake on this motor provides a torque rating of 3 Nm.
Q: What cooling method does the MAC063A-0-ES-4-C/095-B-1/WI523LV use?
A: The MAC063A-0-ES-4-C/095-B-1/WI523LV operates with natural convection cooling, eliminating the need for external fans.
Q: What type of position feedback does the MAC063A-0-ES-4-C/095-B-1/WI523LV offer?
A: This motor provides incremental encoder feedback with standard mounting for position detection.
Q: What is the nominal RPM of the MAC063A-0-ES-4-C/095-B-1/WI523LV motor?
A: The nominal speed for this motor is 3500 revolutions per minute.
