Product Description:

The MAC063A-0-ES-4-C/095-A-1/WI572LV/S006 is an AC permanent-magnet servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. When paired with an analog drive that accepts ±10 V speed or torque commands, the unit provides precise motion for packaging lines, pick-and-place heads, and other automated axes. Its A-length housing reduces the installation footprint in machinery with limited space. A built-in blocking brake with a standard design secures the shaft whenever the drive is disabled, helping prevent unintended movement while the axis is stationary.

The brake can resist up to 3 Nm of load, preventing downward drift when the motor controls a vertical stage. During continuous operation, the rotor reaches a rated speed of 3500 rpm, making the motor suitable for applications that require responsive positioning and controlled high-speed motion. Heat is removed by natural convection, so the motor does not require an external blower when sufficient airflow is available around the housing. A 95 mm centering diameter aligns the stator flange with a compatible gearbox or mounting plate. This alignment supports accurate placement of the motor and helps avoid unnecessary stress on the connected shaft and coupling.

Winding code ES indicates the electromagnetic arrangement and the corresponding resistance and inductance used by a compatible drive. The power leads exit through a connector on side A, allowing the cable to be routed away from adjacent modules and moving machine components. A tacho generator supplies 1.5 V/1000 rpm for speed feedback to compatible analog regulators. Incremental encoder signals are also available for position feedback through the standard encoder mounting arrangement. The motor has a frame size of 063, which provides moderate rotor inertia for rapid acceleration and deceleration. Its output uses a shaft seal that helps prevent lubricant leakage and protects the bearing assembly from dust and other airborne contaminants.