Product Description:

The MAC063A-0-ES-4-C/095-A-1/WI517LV/S001 is a servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Designed for analog drive systems, it converts electrical commands into regulated rotary motion for automated assembly stations, pick-and-place gantries, and light machine tools. The motor uses the 063 frame class and a keyed shaft to couple directly to compact drive trains. Its integrated feedback arrangement helps the paired amplifier maintain stable speed control during repeated start, stop, and positioning cycles. This makes the unit suitable for feed axes and transfer mechanisms that need repeatable motion without a large motor footprint.

The built-in blocking brake delivers 3 Nm of holding torque so vertically loaded axes stay fixed when power is removed. A centering flange diameter of 95 mm aligns the housing with gearboxes and mounting plates, which helps maintain shaft concentricity during installation. Heat generated during operation dissipates by natural convection, eliminating blowers or liquid circuits and keeping the motor layout simple. The rotor reaches a nominal speed of 3500 rpm, and the DC tacho produces 1.5 V/1000 rpm so the analog controller receives a proportional speed signal for closed-loop regulation. Because cooling is passive, the motor can operate without added fan hardware around the housing.

The shaft profile follows a DIN 6885 keyway, giving positive drive engagement without slip when the motor is connected to couplings or pulleys. Power conductors are routed through a connector on side A, which helps keep cable routing predictable in compact machine layouts. Position data are supplied by an incremental encoder, while the tacho channel provides the analog speed signal used by the drive. Inside the stator, the winding uses code ES, matching the A-length motor format and supporting the torque and speed behavior expected from this model.