Product Description:

The MAC063A-0-ES-4-C/095-A-0/WI518LV/S001 belongs to the MAC AC Servo Motors series manufactured by Bosch Rexroth Indramat. It is a motor for analog drives that supplies controlled torque and velocity to indexing tables, packaging axes, and other position-regulated machinery. Within an automation cell, the unit converts command voltages from an analog drive controller into mechanical rotation, allowing precise movement without digital bus traffic. Its integrated feedback arrangement lets the connected amplifier monitor motor behavior continuously so speed corrections can be applied during operation.

A centering flange of 95 mm positions the housing concentrically on a machine plate, while the shaft carries a DIN 6885 keyway so couplings can be locked without slippage. Heat is removed only by natural convection; no fan is fitted, so mounting space must permit free airflow around the housing. The nominal speed is 3500 rpm, giving suitable surface speed for timing-belt transmissions or direct-drive applications. Rotor motion is monitored by an internal tacho that outputs 1.5 V/1000 rpm, and this linear signal supports stable analog speed regulation. The motor length code A keeps the overall depth short, and the design does not include a blocking brake, so external holding devices are needed when power is off.

Electrical interfaces are concentrated on a connector on side A, simplifying cable routing inside narrow cabinets and compact machine frames. Position feedback is supplied by an incremental encoder mounted in the standard location, while the tacho feedback supports the analog control loop. The electromagnetic circuit uses winding code ES, which sets the rated current and back-EMF profile for compatibility with MAC analog amplifiers. The motor size 063 frame matches the torque class for light-to-medium loads and keeps the housing compact for installations with limited space.