Product Description:

The MAC063A-0-ES-4-C/095-A-0/WI515LV/S001 is an AC servo motor built by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. As a motor for analog drives, it provides continuous rotary motion that can be regulated by voltage-controlled amplifiers in positioning or velocity loops on machine tools and handling equipment. Its winding matches the electrical characteristics expected by standard MAC drives, allowing stable torque production and consistent speed behavior in closed-loop motion applications. That operating concept suits established machine platforms where compact dimensions and familiar feedback behavior are preferred.

A centering diameter of 95 mm aligns the flange accurately with gearboxes or mounting plates. The motor reaches a nominal speed of 3500 rpm, allowing fast axis travel while remaining suitable for continuous-duty operation. Tachometer feedback produces 1.5 V/1000 rpm, giving the connected amplifier a linear speed signal for regulation. The ES winding provides the electrical values expected by compatible MAC amplifiers, and heat is removed by natural convection so the housing can dissipate losses without auxiliary airflow. The compact frame helps when the motor must fit near slides, guards, or neighboring axes.

The motor is supplied with no blocking brake, so an external holding method is required when a vertical load must remain stationary after power is removed. Torque is transmitted through a DIN 6885 keyway, which provides positive engagement for pulleys, couplings, and similar drive elements. Electrical power is connected through a connector on side A, helping keep the cable exit clear of adjacent machine components. Position information can also be taken from an incremental encoder mounted in the standard feedback interface, supporting control systems that need rotary feedback in addition to tachometer output. This arrangement supports steady low-speed operation and reliable speed recovery after load changes.